주요메뉴 바로가기 본문 바로가기

주메뉴

IBS Conferences

New Method for Transfer Printing of Flexible Electronics

- A facile, versatile, and damage-free dry transfer printing strategy is developed based on stress control of the deposited thin films -

Researchers at the Institute for Basic Science (IBS), South Korea, have developed an innovative dry transfer printing technique for flexible electronic devices. This method, spearheaded by Prof. KIM Dae-Hyeong, Dr. LEE Sangkyu, (IBS Center for Nanoparticle Research), and Prof. KIM Jihoon (Pusan University), allows for the transfer of high-quality electronic materials without damage, a significant advancement in the field.

Typically, high-quality electronic materials are synthesized and processed at high temperatures to achieve the necessary crystalline structures and electrical properties. These high temperatures, however, make it challenging to process such materials directly on flexible or stretchable substrates. Hence for building flexible/stretchable devices, the electronics must be “transfer printed” from solid to soft substrate. Existing transfer printing technologies issues such as the use of toxic chemicals and potential mechanical damage during the transfer process.

To address this issue, various methods such as laser or thermal processes and delamination in water have been developed. However, these methods require expensive equipment, involve additional post-processing, or are limited to specific environments. Additionally, it is challenging to use conventional transfer printing for high-quality electronic materials that require high-temperature treatment to form crystalline structures.

To overcome these challenges, the research team developed a damage-free dry transfer printing method that controls stress within thin films. This new method allows metal and oxide thin films, processed at high temperatures, to be transferred to flexible substrates without damage. By adjusting sputtering parameters, the team controlled the type and magnitude of stress within the thin film. They created bilayer structures with varying stresses to maximize the stress gradient and applied additional tensile stress through external bending deformation. This process maximizes the strain energy release rate, allowing reliable delamination by surpassing the interfacial strength between the thin film and the substrate.

"Our transfer method avoids toxic substances, minimizes device damage, and eliminates the need for post-processing, resulting in shorter transfer times," said Dr. SHIN Yoonsu, first co-author. "It can transfer large areas as well as micro-scale patterns, making it highly versatile."

The team demonstrated that greater stress gradients within thin films result in larger bending moments, causing them to curl and transform from a two-dimensional (2D) thin film into a three-dimensional (3D) structure. The configuration of 3D structures can be adjusted by the pattern of the adhesive layer during transfer printing, allowing for the design and fabrication of desired structures to meet various requirements.

Dr. LEE Sangkyu, one of the corresponding authors, emphasized, "The key to this research is the development of a damage-free dry transfer printing technique by controlling only material properties, unlike previous studies." He added, "We plan to further research the fabrication of diverse 3D devices, leveraging the technology to transform 2D thin films into 3D structures, beyond the simple 2D flexible battery devices demonstrated in the paper."

"Transfer printing technology has applications across fields such as flexible electronics, optoelectronics, bioelectronics, and energy devices. Our method offers significant advantages for producing high-density 2D and 3D functional thin film structures without damage, greatly benefiting the development of new high-performance electronic devices," remarked Prof. KIM Dae-Hyeong.

Figure 1. Concept of damage-free dry transfer printing using stress engineering. a, b) Schematic illustrations describing the formation of a single (a) and bilayer (b) structured Pt thin films. c) Stress distribution in the bilayer film and further stress enhancement through mechanical bending.
Figure 1. Concept of damage-free dry transfer printing using stress engineering. a, b) Schematic illustrations describing the formation of a single (a) and bilayer (b) structured Pt thin films. c) Stress distribution in the bilayer film and further stress enhancement through mechanical bending.

Figure 2. Transfer of the various 2D Pt thin films and their conversion into 3D architectures. a) Transfer process of the Pt thin film with the PDMS stamp. b, c) Transfer of the patterns composed of three blades (b) and four circles (c).
Figure 2. Transfer of the various 2D Pt thin films and their conversion into 3D architectures. a) Transfer process of the Pt thin film with the PDMS stamp. b, c) Transfer of the patterns composed of three blades (b) and four circles (c).

Figure 3. Fabrication of flexible thin-film battery with the transferred LiCoO2 thin film. a) A schematic illustration depicting the expanded view of the flexible thin-film battery. b) Cross-sectional scanning electron microscopy image of the flexible thin-film battery. c) Voltage profile of the thin-film battery. d) Picture of the thin-film battery powering an LED array. e) Bending deformation of a circuit consisting of the thin-film battery and the LED array.
Figure 3. Fabrication of flexible thin-film battery with the transferred LiCoO2 thin film. a) A schematic illustration depicting the expanded view of the flexible thin-film battery. b) Cross-sectional scanning electron microscopy image of the flexible thin-film battery. c) Voltage profile of the thin-film battery. d) Picture of the thin-film battery powering an LED array. e) Bending deformation of a circuit consisting of the thin-film battery and the LED array.

Notes for editors

- References
Yoonsoo Shin, Seungki Hong, Yong Chan Hur, Chanhyuk Lim, Kyungsik Do, Ji Hoon Kim, Dae-Hyeong Kim, and Sangkyu Lee, Damage-free dry transfer method using stress engineering for high-performance two- and three-dimensional electronics. Nature Materials. DOI: 10.1038/s41563-024-01931-y


- Media Contact
For further information or to request media assistance, please contact Prof. Dae-Hyeong Kim at the Center for Nanoparticle Research, Institute for Basic Science (IBS) (dkim98@snu.ac.kr) or William I. Suh at the IBS Public Relations Team (willisuh@ibs.re.kr).


- About the Institute for Basic Science (IBS)
IBS was founded in 2011 by the government of the Republic of Korea with the sole purpose of driving forward the development of basic science in South Korea. IBS has 7 research institutes and 31 research centers as of June 2024. There are eight physics, three mathematics, five chemistry, seven life science, two earth science, and six interdisciplinary research centers.


Research

Are you satisfied with the information on this page?

Content Manager
Public Relations Team : Yim Ji Yeob   042-878-8173
Last Update 2023-11-28 14:20