주요메뉴 바로가기 본문 바로가기

주메뉴

IBS Conferences

How to stack graphene up to four layers:

Cu–Si alloy at high temperature offers clues for the synthesis of wafer-scale, single crystalline graphene stacking and for our lives after the end of the Moore’s Law

Graphene, an atomically thin hexagonal structure of carbon atoms is a potential candidate for electronic and optoelectrical applications such as transparent electrodes and interconnect for integrated circuits. Yet, it is one thing to possess such useful properties and to induce an intended characteristic from this “wonder material” is another. In the face of the end of the “Moore’s Law”, chip makers have set their sight on multi-layered graphene for its scaling ability of integrated circuits to smaller physical dimensions and the electric-field induced bandgap, which is not affordable in monolayer graphene. Furthermore, owning to exotic physical properties controlled by its stacking orders (the arrangement of graphene layer along vertical direction) such as superconductivity and quantum Hall effect to name a few, multi-layer graphene is an interesting material for condensed matter physicists. Still, the unknown growth method for uniform single-crystalline multilayer graphene growth in a wafer scale presents a challenge.

Led by professor LEE Young Hee at the Center for Integrated Nanostructure Physics, the Institute for Basic Science (IBS) in Sungkyunkwan University, South Korea, an IBS research team reports a novel method to grow multi-layered, single-crystalline graphene with a selected stacking order in a wafer scale. They obtained four-layered graphene using chemical vapor deposition (CVD) via Cu-Si alloy formation.

There have been several approaches to control the number of graphene layers. Conventionally, the monolayer graphene, which is easily grown on Cu-substrate, can be detached from the Cu-substrate and transferred onto insulator substrates such as SiO2/Si. Therefore, the simplest method to make multilayer graphene is to stack them layer-by-layer via the transfer process. However, this transfer process may cause tearing, wrinkles, and/or polymer residues. Though such issues can be avoided via a direct method, i.e. CVD on Cu substrate, the low solubility of carbon (C) in copper (Cu) hampers the controlling of the number of graphene layers with high uniformity in a large area. By depositing Ni or Co to form Cu-Ni/ Cu-Co alloys or employing oxygen-rich Cu substrate, C solubility in Cu is boosted and thus stacks more layers of graphene. Nevertheless, a small portion of inhomogeneous multilayers occurs. Controlling the crystallographic stacking sequence of graphene films thicker than two layers with high uniformity has not been demonstrated to date.

Figure 1. Schematic of growth process. Step I: Si atoms were uniformly distributed in the monocrystalline Cu(111) film; step II: SiC formation at 900 ℃ in a H2-rich environment; step III: multilayer graphene islands were grown at 1075 ℃; step IV: a full multilayer graphene film was obtained.
▲ Figure 1. Schematic of growth process. Step I: Si atoms were uniformly distributed in the monocrystalline Cu(111) film; step II: SiC formation at 900 ℃ in a H2-rich environment; step III: multilayer graphene islands were grown at 1075 ℃; step IV: a full multilayer graphene film was obtained.

Dr. Van Luan Nguyen, the first author of the study (now at Samsung Advanced Institute Technology) proposed to use silicon carbide (SiC) on the surface of Cu substrate alloy, via the sublimation of Si atoms at a high temperature. They controlled the C solubility in the Cu film by introducing Si content on Cu surface by heat treatment of Cu substrate with a constant H2 gas flow inside the quartz tube of CVD chamber. “The formation of a homogeneous Cu-Si alloy, as a role of catalyst, was critical to control the number layers of graphene film in a wafer scale with methane gas. With the presence of Cu-Si alloy, SiC can be formed when methane gas is injected and the following sublimation process of Si atoms leaves C atoms behind to form multilayer graphene. Si amount is fixed at 28.7 % for uniform multilayer graphene film. Depending the concentrations of argon (Ar)-diluted methane gas, the number of graphene layers varies,” says Dr. Van.

Figure 2. Optical micrographs of mono-, bi-, tri-, and tetralayer graphene on the SiO2/Si substrate. The insets of show cross-sectional TEM images of the corresponding graphene films.
▲ Figure 2. Optical micrographs of mono-, bi-, tri-, and tetralayer graphene on the SiO2/Si substrate. The insets of show cross-sectional TEM images of the corresponding graphene films.

Figure 3. Photograph of centimeter-scale mono-, bi-, tri-, and tetralayer graphene on the SiO2/Si substrate.
▲ Figure 3. Photograph of centimeter-scale mono-, bi-, tri-, and tetralayer graphene on the SiO2/Si substrate.

“Growing in a large scale of this much-hyped graphene has seen much progress over a decade, but building multi-layered graphene is just in its early stages. Our study offers a novel approach to upgrade the conventional CVD method by introducing an intermediate process of in-situ formation of SiC film,” notes Dr. LEE Sang Hyub, coauthor of the study. Importantly, this study provides a new platform to synthesize graphene multilayer towards the uniform large-area single-crystalline layer-tunable multilayer graphene as well as graphite thin film. This is an initial step to incorporate multilayer graphene to display panels and integrated circuits such as via-holes and replacement of Cu electrodes as well as photoelectronic and photovoltaic devices.

“Deposition of Si by conventional methods at low temperatures such as thermal evaporation or sputtering does not work for uniform multilayer graphene growth. The key in our new approach is to form uniform Cu-Si alloy on quartz tube chamber in which Si is sublimated at high temperature of 900 ℃ with H2 gas flow in a controllable manner,” explains Director LEE Young Hee, the corresponding author of the study. Although the substantial achievement has been demonstrated in our current work, Director Lee cautions that the method to deposit Si at high temperature during the growth process is not practical and can be harmful for the quart tube for long-term use. They are searching for a solution to replace the current one for mass product.

KIM Dahee Carol
IBS Communications Team

Notes for editors

- References
Van Luan Nguyen, Dinh Loc Duong, Sang Hyub Lee, José Avila, Gyeongtak Han, Young-Min Kim, Maria C. Asensio, Se-Young Jeong, Young Hee Lee. Layer-controlled single-crystalline graphene film with stacking order via Cu-Si alloy formation. Nature Nanotechnogoly (2020) (DOI: 10.1038/s41565-020-0743-0).

- Media Contact
For further information or to request media assistance, please contact Sanghyub Lee(+82-10-6769-3746, yamn123@naver.com), doctoral student; Mr. Daewoong Bae, Head of IBS Communications Team (+82-42-878-8195, woongs@ibs.re.kr); or Ms. Dahee Carol Kim, Public Information Officer of IBS & Science Communicator (+82-42-878-8133, clitie620@ibs.re.kr)

- About the Institute for Basic Science (IBS)
IBS was founded in 2011 by the government of the Republic of Korea with the sole purpose of driving forward the development of basic science in South Korea. IBS has 30 research centers as of January 2020. There are ten physics, two mathematics, six chemistry, six life science, one Earth science, and five interdisciplinary research centers.

  • [scienmag] How To Stack Graphene Up To Four Layers
  • [EurekAlert] How to stack graphene up to four layers
  • [tekdeeps] IBS succeeds in synthesizing 4-layer graphene
  • [newsbeezer] Stacking multiple graphene layers also increases semiconductor integration … IBS, the world’s first success
  • [bioengineer] How to stack graphene up to four layers
  • [sciencecodex] How to stack graphene up to four layers
  • Research

    Are you satisfied with the information on this page?

    Content Manager
    Public Relations Team : Yim Ji Yeob   042-878-8173
    Last Update 2023-11-28 14:20